light I-beam and wide parallel leg I-beam (H-beam). The waist width of hot-rolled ordinary I-beam in China is ~ the waist width of No. I-beam is. The types of I-beam include hot-rolled ordinary I-beam expressed as No. ~ No., and the inclination of inner wall of leg is : The pass system of rolled I-beam includes direct pass system, cross pass system and mixed pass system. In addition, I-beam can also adopt special rolling method.Alloy pipes can be used for heating (cooling) projects.Charlotteton, In order to ensure the welding quality of pipes,CharlottetonHow much is the I-beam of 28, welders shall be trained, tested and qualified. In addition to the basic theory, the welder should consider the operation skills. The pipe welding process may include several postures of overhead welding, vertical welding and overhead welding (when the pipe cannot rotate). The size of current should be selected to take into account the formation of vertical welding and overhead welding (some pipes are not very large, and the current cannot be adjusted in the middle of one formation). In the process, the stability and formation of arc should be controlled, It can swing properly, and the forming shall be well combined with the necessary swing.Alloy pipe can be divided into round steel pipe and special-shaped steel according to different cross-sectional area. Because the circular area is large on the premise of the same side length, a large amount of liquid can be transported with an annular tube. In addition, the bearing force is more symmetrical. Therefore, most seamless steel pipes are round steel pipes.Santa Lucia,At present, there is still a big gap in the production technology of C-section steel between China and foreign countries.The core of C-section steel is the structural system of braced frame. More than half of such senior managers in China are the former. Unfavorable to earthquake resistance. Hydraulic power, and the power is large, which is similar to the plate shearing and bending machine. The general control process is complex, and PLC control is mostly used.Whether I-section steel is ordinary or light, because the section size is relatively high and narrow, the moment of inertia of the two main axes of the section is quite different, so it can only be directly used for members bent in the plane of their web or form lattice stressed members. It is not suitable for axial compression members or members with bending perpendicular to the web plane, which makes it very limited in the scope of application. I-beam is widely used in buildings or other metal structures.
category：Building materials / date：2022-06-23 01:48:45 / browse：81 / comment：5
The high-temperature passivation treatment of alloy pipe is to obtain the passivation treatment film by heating in the heat treatment equipment. Before passivation treatment, the surface layer of parts must be removed to remove waste. At a higher temperature, the passivation treatment film can be obtained according to the transformation temperature and time. The hue of passivation treatment film can refer to the annealing color of alloy pipe, and the main parameters of ambient temperature and time of heat treatment process can be selected.When the beam width is small, the reinforcement shall be bent. Small longitudinal crackrecommend,H-section steel is an economic section high-efficiency profile with more optimized section area distribution and more reasonable strength weight ratio. It is named because its section is the same as the English letter 'H'. There is no slope on the inner side of the two outer edges of H-section steel, which is straight. This makes the welding and splicing of H-section steel simpler than I-section steel, better mechanical properties per unit weight, and can save a lot of materials and construction time.Because alloy pipe is a very unique pipe fitting, we must use appropriate methods to carry out installation in the case of installation, so as to ensure the performance index of the data. Generally, when installing alloy pipes, we will use some flanges and elbows to fix them, so as to ensure that the raw materials can be fixed very well. Therefore, when we carry out use we must ensure the quality of flanges and elbows, so as to ensure the actual effect of alloy pipe assembly. If there are instrument panel components that must be assembled on the pipeline, they must be installed together.When selecting I-beam in structural design, reasonable I-beam shall be selected according to its mechanical properties, chemical properties, weldability and structural size. I-beam is mainly divided into ordinary I-beam, light I-beam and wide flange I-beam. According to the height ratio of flange to web, it is divided into wide, medium and narrow flange I-beams.
Dehydrogenation solution: the alloy pipe shall be dehydrogenated after passivation treatment to avoid alkali embrittlementInspection items,Application characteristics of I-beam Polished stainless steel pipes shall be subject to internal inspection and strict manual selection by the steel pipe quality inspector through metal detector (or hydrostatic test), and qualified products shall be packaged and delivered.The working principle of flat steel finishing machine in I-beam production process is to pre level and finally level the cold flat steel with two groups of leveling wheel sets staggered up and down in the thickness direction; A pair of finishing wheels arranged relatively are used to extrude the width direction,CharlottetonWholesale of galvanized pipe manufacturers, so that the width is compressed to achieve the expected parameters,CharlottetonHow much is 300x150 I-beam, 1 ton, and the compression amount is adjustable; Straighten the width with staggered straightening wheels.Charlotteton,Function of I-beam: where is I-beam mainly used? Direct rolling pass system. The direct rolling pass system refers to the pass system in which the two open legs of the I-beam pass are on the same side of the roll axis at the same time, and the waist is parallel to the roll axis.I-beam